Showing posts with label Engine. Show all posts
Showing posts with label Engine. Show all posts

Wednesday, February 27, 2013

Pulley

PulleyPulley is a wheel with hollow sections along the sides for a rope or cable. Pulleys are usually used in a circuit that is designed to reduce the amount of force needed to lift a load. However, the amount of work done to make the load reaches the same height is the same as that required without the use of pulleys. The force is reduced, but the style has to work over longer distances. Effort required to lift a load is roughly equal to the weight of the load divided by the number of wheels. The more wheels there, the system less efficient. because there will be more friction between the rope and wheels. Pulley is one of the six types of simple plane.

Found no record of when and by whom the pulley was first developed, but of possible be from Eurasia. The base-forming system of pulleys, wheels, was found some time after the discovery of Eurasia to the community in the western hemisphere, sub-Saharan Africa, and Australia. Also believed that Archimedes developed the first series of pulley system, as recorded by Plutarch where.

Single fixed pulley

Style your muscles while raising the bucket with rope pulled upward force equal to your muscles when pulling the rope down through the single pulley fixed.

Single fixed pulley work to change the direction of gravity pull up to pull down. When you draw water without going through the pulley, you have to pull the rope up. Vertical direction of the force is your weight down. Because the direction of the force tarikmu "opposite" the direction of your weight, your muscle force when pulling the rope to the top was not helped by the force of your weight. Therefore, the work of raising heavy bucket.

Fixed pulley KM = 1
Pulleys move KM = 2
Compound pulley KM = n (n = number of pulleys)
KM = Mechanical Advantage

The Spring

The Spring
The spring is an elastic object used to store mechanical energy. Spring is usually made of steel. The spring was also found in the car's suspension system. In the spring car has the function to absorb shock and vibration from the road wheels being forwarded directly to the vehicle body. In addition, spring is also useful to add to the cengkerem tires against the road surface.



Type the spring is:
  • The spring tension
  • compression spring
  • The spring constant
  • variable spring
torsion bar springs (torsion bar spring). This type of spring formed from steel rod torsion elastic.

Based on the form of springs are divided into:
  1. Coil springs (coil springs) made ​​from steel rod and has a spiral shape.
  2. Leaf springs (leaf springs) made ​​from steel blades are bent and supple.
  3. Springs are formed by machine (Machined spring)

usefulness
  1. Spring balancer in minutes
  2. Springs on the keyboard
  3. In the CD player
  4. In the pen (stationery)
  5. The spring mattress
  6. Pogo sticks
  7. Slinky
  8. trampoline
  9. vehicle suspension
  10. Trunk Whammy

Steel

Steel
Steel is a metal alloy, ferrous metals as a basic element carbon as the main alloying element. The content of the element carbon in steel ranges from 0.2% to 2.1% of its weight according to grade. Carbon functions as an element in steel is amplified by preventing dislocations in the crystal lattice shift (crystal lattice) iron atom. Carbon steel is known as black as black steel, widely used for agricultural equipment such as sickle and hoe.

Other common alloying elements other than carbon is added (titanium), chromium (Cr), nickel, vanadium, cobalt and tungsten (tungsten). By varying the carbon content and other alloying elements, various types of steel quality can be obtained. The addition of carbon content in steel to improve hardness (hardness) and the strength of its appeal (tensile strength), but on the other hand makes it brittle (brittle) and lower tenacity (ductility).

Size of violence in the steel material known as hardness, in which there are two types of hardness, the hardness and Brinell hardness vickers.

classification of steel

a. based on the composition
  1. carbon steel
  2. Low alloy steel
  3. Stainless steel
b. Based on the manufacturing process
  1. Steel furnace open
  2. electrical kitchen
  3. Basic oxidation process

c. Based on the form of the product
  1. plates bars
  2. tube
  3. sheet
  4. tape
  5. structural form

d. Based on microstructural
  1. ferritic
  2. pearlitic
  3. martensitic
  4. austenitic
  5. Based on the usability in construction
  6. Structural Steel
  7. Non-Structural Steel

The Diesel Engines

The Diesel Engines
The diesel engine is a type of internal combustion engine, more specifically, a trigger compression engine, where fuel is ignited by the high temperature of the compressed gas and not by means of energy (such as spark plugs).

This machine was found in 1892 by Rudolf Diesel, who received a patent on February 23, 1893. Diesel wants a machine to be used with a wide variety of fuels including coal dust. Present them at the Exposition Universelle He (World's Fair) in 1900 using peanut oil (see biodiesel). Subsequently improved and perfected by Charles F. Kettering.

How diesel engines work

Diagram of a thermodynamic cycle diesel engine ideal. Diesel engine working order sequence of numbers 1-4 in a clockwise direction. In cycle diesel engines, combustion occurs in constant pressure and discharge occurs in a fixed volume. Energy produced per cycle is the area within the line cycle.

Diesel engines that are in the museum

When air is compressed its temperature will increase (as stated by Charles Law), a diesel engine uses these properties to the combustion process. The air sucked into the combustion chamber diesel engine and compressed by a piston which docked, much higher compression ratio than gasoline engines. Some time before the piston at top dead point position (TMA) or BTDC (Before Top Dead Center), diesel fuel is injected into the combustion chamber under high pressure through a nozzle that mixes with pressurized hot air. The results of this mixing ignite and burn quickly. Spraying of fuel into the combustion chamber when the piston started approaching (very close) TMA to avoid detonation. Spraying fuel directly into the combustion chamber above the piston is called direct injection (direct injection) while spraying fuel into a special room that is directly related to the main combustion chamber where the piston is called indirect injection (indirect injection).

This caused the gas explosion in a sealed combustion chamber expands rapidly, pushing the piston down and produces linear force. Connecting rod (connecting rod) to channel the movement into the crankshaft and the crankshaft was converted into a linear force power play. Power play at the end of the crankshaft axis used for various purposes.

To improve the ability of diesel engines, are generally added components:
  • turbocharger or supercharger to increase the volume of air entering the combustion chamber because the air entering the combustion chamber is driven by a turbine in the turbo / supercharger.
  • Intercooler to cool air will enter the combustion chamber. Volume of hot air will expand and vice versa, then the cooled air that aims to occupy the combustion chamber can be more.
The diesel engine is hard to live on when the engine in cold conditions. Some engines use a little thing called electronic heater plugs light up (spark / glow plug) in the cylinder to heat the combustion chamber prior to ignition. Others use the heater "resistive grid" in the "intake manifold" to warm the incoming air until the engine reaches operating temperature. Once the engine is operating combustion of fuel in the cylinder to effectively heat the engine.

In very cold weather, diesel fuel thickens and increases the viscosity and forms wax crystals or a gel. This can affect the fuel system from the tank to the nozzle, making ignition engine in cold weather becomes difficult. How common is used to heat the fuel filter and fuel lines electronically.

For the application of an electric generator, an important component of the diesel engine is the governor, which controls the supply of fuel that the engine is always at the desired rotation. If the engine speed drops too much power quality issued will decrease so electrical equipment can not work properly, whereas if the engine speed is too high, it can lead to over-voltage that could damage electrical equipment. Modern diesel engines use advanced electronic control to achieve this goal through an electronic control module (ECM) or electronic control unit (ECU) - which is the "computer" in the machine. ECM / ECU receives engine speed signals through sensors and uses search algorithms and calibration tables stored in the ECM / ECU, he controls the amount of fuel and time through an electronic or hydraulic actuators to adjust the engine speed.

Type of diesel engine

Usually the number of cylinders in multiples of two, although any number of cylinders can be used for the crankshaft can be balanced to prevent excessive vibration. Inline 6 engines most widely produced in the medium-duty engines to heavy-duty, though the V8 and 4 line are also widely produced.

The diesel engine works with compressed air high enough so that the big diesel engines have added some more air. Then used a supercharger or turbocharger on the intake manifold, with the aim of meeting the needs of compressed air.


The advantages and disadvantages compared with spark-ignition engines

For the same power output, size of the larger diesel engines than gasoline engines because the construction is needed in order to withstand the high pressure combustion or ignition. With the construction of the huge fan is relatively easy and inexpensive modifications to increase power with the addition of a turbocharger without much thought to the resilience of the components of high takanan. Gasoline engines need a more accurate calculation for the modified power increase because in general the components in them is not able to withstand the high pressure, and makes diesel engines machine candidate for low cost modifications.

The addition of a turbocharger or supercharger to the engine aim to increase the amount of air entering the combustion chamber during compression so will result in a high pressure and at the time of ignition or combustion will generate great power. The addition of a turbocharger or supercharger on a diesel engine does not significantly affect the use of fuel because the fuel is injected directly into the combustion chamber during the combustion chamber in a state of highest compression ignition to occur to trigger the burning process. While the addition of a turbocharger or supercharger to the engine greatly affects gasoline fuel consumption because of air and fuel is mixed with the right composition before entering the combustion chamber, both for gasoline engines with carburetors or injection systems system.

The Machine

Machine
The machine is a mechanical or electrical device that sends or convert the energy to perform or assist human task execution. It usually requires an input as the trigger, sending the energy that has been converted into an output, which perform tasks that have been set. 

Machines in the Indonesian language often referred to as a plane, for example telephone English telephone machine translations. But later said the plane tends to lead to airplanes.

Machinery has developed the capability of humans since before the written record. The main difference from simple tools and mechanisms or simple plane is a source of power and might free operation. The term usually refers to machine parts that work together to do the work. Usually these tools reduce the intensity of the style that is done, change the direction of the force, or alter a form of motion or energy into another.

The Steam Engine

The Steam Engine
The steam engine is a machine that uses heat energy in steam and convert it into mechanical energy. The steam engine used in pumps, locomotives and marine vessels, and is very important in the Industrial Revolution.

The steam engine is an external combustion engine, the liquid separated from the burning. The heat source can be used, namely solar power, nuclear power, or geothermal power. If the vapor evolved through piston or turbine, will cause mechanical work.

The earliest record of the history of the steam engine technology, we can see the city of Alexandria in the year 75. There are a mathematician named Hero, who is also known premises name "Heros or" Heron "who wrote three books about the mechanical properties of air and introduce the design of a simple steam engine. These machines are known as aeolipile or Aeolypile, or also called Eolipile.

The working principle of this machine is to use steam pressure to rotate the ball (vessel) containing water as a raw material producing steam. Ball (vessel) could be spinning because of the encouragement of the steam coming out of the nozzle which is located on the side of the vessel.

Hero method that converts steam energy into motion is the basis for his successors to develop steam engine technology in the future.

History of Steam Engines

1 Hero (10-70)

The earliest record of the history of the steam engine technology, we can see the city of Alexandria in the year 75. There are a mathematician named Hero, who is also known premises name "Heros or" Heron "who wrote three books about the mechanical properties of air and introduce the design of a simple steam engine. These machines are known as aeolipile or Aeolypile, or also called Eolipile.

The working principle of this machine is to use steam pressure to rotate the ball (vessel) containing water as a raw material producing steam. Ball (vessel) could be spinning because of the encouragement of the steam coming out of the nozzle which is located on the side of the vessel. Hero method that converts steam energy into motion is the basis for his successors to develop steam engine technology in the future.

2 Giovanni Battista della Porta (1538-1615)

Giovanni Battista della Porta della Porta or Gambattista or also known by the name of John Baptist Porta was a scholar, Polymath, and playwright who came from Naples, Italy. He is the scientist who first discovered the role of steam in creating a vacuum.

The theory put forward is that if the water is converted into steam in a closed container can result in increased pressure. Vice versa, if the steam is condensed into water in a closed room it will result in a decrease of pressure. The theory that later would become the main concept of the design in the development of the steam engine made by his successors.

3 Denis Papin (1647-1712)

In the year 1679 a physicist, mathematician and inventor of the French found a tool called a steam digester which led to the invention of the steam engine and the presser cooker (pressure cooking pot). The findings he worked together with fellow named Robert Boyle, a filusuf, physicists, chemists, inventors, and scientists of Irish nationality.

Description:

A = Furnace
B = vessel
C = Close vessel
D = bolt fasteners
E = Valve
F = Stand lid
G = rod load
H = Closing furnace
W = Load

This tool is shaped like a container with a lid that is used to produce pressurized steam. To keep the device did not explode, Papin complement these findings with a valve that can be moved up and down as the exhaust steam to regulate the pressure inside the container. Besides Papin also developed the engine with the piston at the top to add a closed cylinder that will move up and down according to the theory discovered by Giovanni Battista della Porta. The concept is then initiated the discovery of the first steam engine in the world that uses a piston and cylinder engine.


4 Thomas Savery (1650-1715)

Thomas Savery was an engineer who worked on the British military and British inventor. In 1698 he invented the steam engine in the world. Discovery begins when he worked at a coal mine that had difficulty in pumping the water used to irrigate the mine.

The working principle of this machine is to raise the pressure of the steam in the boiler. The vapor is then inserted into the vessel of the work, making it possible to blow the water out through the pipe. When the temperature in the vessel to be hot as the steam filled the kettle and vessel faucet is closed, if necessary, the outside of the vessel cooled. This resulted in the steam inside to condense, creating a partial vacuum and atmospheric pressure pushes the water up through the pipe until the vessel is full. At this point the closed faucet at the bottom of the vessel, and the vessel and pipe spigot is opened to drain the pipes from the boiler. High vapor pressure will force the water out of the vessel.

5 Thomas Newcomen (1663-1729)

Thomas Newcomen was an English blacksmith who invented the steam engine the atmosphere, an improvement on the previous design of Thomas Savery. Newcomen steam engine uses the power of atmospheric pressure to work. In the Newcomen engine was the intensity of the pressure is not limited by the vapor pressure, unlike what Thomas Savery patented in 1698.

In 1712, Thomas Newcomen together with John Calley built the first machine over a pit filled with water in which the machine is used to pump water out of mines. Newcomen engine was the predecessor engine James Watt and one of the most exciting piece of technology developed during the 17th century.

The figure shows the position of the boiler is located just below the cylinder. First steam flow from the boiler into the cylinder. When the piston mancapai peak, the water is sprayed into the cylinders to cool the steam that forms a vacuum. Piston driven down by the weight of the air above it (15 pounds per inci2 of the piston). The cycle occurs repeatedly.

6 James Watt (1736-1819)

James Watt was a mechanical engineer and inventor from Scotland. In 1769 James Watt patented a separate condenser connected to the cylinder by a valve. Unlike Newcomen steam engine belonging, the steam engine by James Watt is there a condenser to cool the hot cylinder. James Watt's engine soon became the design for all modern steam engine triggered the industrial revolution. Watt power unit named after James Watt 1 Watt magnitude which is equivalent to 1/746 HP.Keterangan:

C = Cylinder Steam
E = exhaust valve
H = linking the crankshaft to the

beam

N = pump water
O = crankshaft
Q = Regulator (Govenor)
P = Torak
R = Trunk air pump
T = input valve steam
g = link connecting

piston and beam through the motions

parallel gdc
m = lever steam inflow

The fundamental difference from James Watt's engine by Thomas Newcomen engine belonging to the location of the condenser is used. If the engine Newcomen steam condensing chamber for working together with the cylinder, then the engine James Watt steam condensing chamber to separate from the cylinder. In addition, the mechanism driving the piston of the engine James Watt using the rotary motion of a spinning drive wheel, unlike the Newcomen engine that uses the translational motion (back and forth) of the water pump.

Stirling engine

Stirling engine
History

Stirling engine was first discovered by Dr. Robert Stirling and patented by him in 1816. In the family of heat engines, Stirling Engines regeneration machine is defined as a closed cycle hot air. In this context, the closed-cycle means that the fluid works are permanently stuck in the system, in which the open-cycle engines such as the internal combustion engine and some steam engines, fluid exchange with the environment works as bagiaan of the work cycle. Regeneration means that the use of an internal heat exchanger, which can improve the efficiency of the engine. There are so many possibilities of using stirling engines, with the majority in the category starting piston engines with reverse. Stirling engine is traditionally classified as an external combustion engine, although heat can be obtained from sources other than combustion such as solar or nuclear. Stirling engine operates through the use of an external heat source and an external heat sink, each guarded in order to have a sufficiently large temperature difference.


Background

In an effort to improve the conversion can be obtained from the change of heat energy into work, stirling engine has the potential to achieve the highest efficiency of all heat engines, theoretically up to a maximum efficiency of Carnot engine, although in practice these efforts continue to be limited by a variety of properties of non-ideal of both working fluid or material from the machine itself, such as friction, thermal conductivity, tensile strength, creep, melting point, etc.. This machine can be operated through a variety of heat sources that can suffice, such as solar, and nuclear chemistry. Compared to internal combustion engines, Stirling engines have the potential to be more efficient, quieter, and easier to maintain.

In recent years, increasing profits Stirling engine, made possible by the increase in energy prices, scarcity of energy resources, to concern about environmental issues such as global warming. Increased interest in the Stirling engine's results with continued increase in research on the Stirling equipment. Applications including water pumping, astronautik, and a power plant to heat sources that are not in accordance with the internal combustion engine such as solar energy. Characteristics of a Stirling engine is another useful mechanical energy supplied if he can operate as a heat pump.